Getting Started:
- Wash Your Hands: Thoroughly wash your hands with soap and water to remove dirt and oils that can contaminate your lenses.
- Prepare Your Lens: Carefully remove the lens from the blister pack and place it on your clean fingertip.
- Inspect the Lens: Ensure the lens is free of any debris or damage.
Insertion:
- Gently Place the Lens: Position your non-dominant hand on your eyelid to hold it open.
- Align the Lens: Use your dominant hand to bring the lens close to your eye.
- Blink and Adjust: Blink gently to help the lens settle into place. If needed, use your eyelid to adjust the lens.
Removal:
- Break the Seal: Gently break the seal between the lens and your eye using your index finger.
- Gently Pinch: Pinch the lens between your thumb and index finger.
- Remove Carefully: Lift the lens away from your eye, avoiding pulling on your eyelid.
Lens Care:
- Clean Your Lenses: Use a lens solution to clean and disinfect your lenses as directed by the manufacturer.
- Store Properly: Store your lenses in a clean lens case filled with fresh solution.
- Replace Regularly: Replace your lenses as recommended by your eye care professional.
Get used to the Lenses Use!
1
Place the lens on the tip of your index finger. Make sure the edge of the lens is perfectly upright.
2
Hold your eye open with your free hand, then place the lens with your index finger on the cornea.
3
Slowly blink and look in different directions to stabilize the lens.